Product introduction:
YH3015-500 fiber laser cutting machine is the finalize the design
product, maximum cutting ability, carbon steel plate up to 6mm,and
quality cutting 6mm, and 2mm stainless steel plate; double driving
structure of the longitudinal direction with pinion and rack, and
also transverse direction with gear and rack transmission.
Optical fiber laser as the fourth generation of laser technology,
has superior performance like long life, good flexible, low power
consumption, free of maintenance, easy integration and so on ,being
widely used in laser cutting, which is recognized as the most
stable in the global performance .
Applicable materials: professional used to cut thin sheet metal, in
a variety of high-quality cutting 0.5 ~ 10mm carbon steel sheet,
0.5 ~ 4mm stainless steel plate, can also be cutting aluminum alloy
plate, galvanized sheet, electrolytic plate, silicon steel,
titanium alloy, aluminum zinc plate and other metal materials.
Technical indicators:
1. Machine tool technology parameters
| Items | Technical parameters |
|
| Max cutting size (mm) | 3000×1500 |
| The workpiece maximum height (mm) | 90 |
| Effective travel | X axle(mm) | 1550 |
| Y axle (mm) | 3050 |
| Z axle (mm) | 100 |
| PositionaI accuracy | X axle (mm/m) | ±0.05/1000 |
| Y axle (mm/m) | ±0.05/1000 |
| Z axle (mm/m) | ±0.01/100 |
| repeated positioning accuracy | X axle (mm) | ±0.01 |
| Y axle (mm) | ±0.01 |
| Z axle (mm) | ±0.005 |
| Rapid positioning speed | X axle (m/min) | 72 |
| Y axle (m/min) | 72 |
| Z axle (m/min) | 15 |
| Max Cutting Speed (m/min) | 15 |
| IP Grade | IP54 |
| Total weight (T) | 4.35 |
| Machine Power Consumption (Kwh) | 1.6 |
| Boundary dimension L×W×H(mm) | 4191×2520×1326 |
2. Laser & process parameters
| Items | Technical parameters |
|
| working mode | Continuous/modulation |
| Laser power(W) | 500 |
| Laser wavelength (nm) | 1070 |
| The maximum modulation frequency (KHz) | 5 |
| laser mode | Multi mode |
| Optical quality (M2) | 2.2mm*mrad |
| Power adjust range (%) | 5-100 |
| Fiber Length (m) | 10m |
| Type of cooling | water-cooling |
| Operating temperature (℃) | 10-40 |
| Long-term stability (24h) | ﹤2% |
| Laser life(h) | 100000 |
| maximum cutting thickness | MS (mm) | 12 |
| SS(mm) | 4 |
| cutting speed (1mm MS) | 15m/min |
| Focal length F(mm) | 150 |
| Adjustable focus range (mm) | 0-10 |
| Overall Power Consumption (Kwh) | 4 |
Fiber Laser IPG- YLS-500:
YLS-500w series laser of IPG is a new generation of near infrared
spectral range (1060 ~ 1080 nm) semiconductor pump single-mode
continuous ytterbium doped fiber laser system, it has high power,
the ideal high beam quality, optical fiber transmission and
electro-optic conversion efficiency .The laser system has
incomparable and high reliability comparing to various solid state
laser and gas laser, its advantages are: wide range of wavelength
selection, extremely low signal-to-noise ratio, high stability and
long life of the pump sources are used.
Main features:
- The beam quality of excellence(BPP)
- All constant power range BPP
- Use of long focal length can still get a small spot
- photoelectric conversion efficiency 30%
- Maintenance free operation
- Modular design, "plug and play"
- Small, easy to install
- 100000 hours of free maintenance
